Kyocera ECOSYS M3040dn Operation Manual page 64

Installing and Setting up the Machine > Energy Saver function
2
3
2
Press the [▲] or [▼] key to select [Common Settings], and press the [OK] key.
Sys. Menu/Count.:
User/Job Account
04
User Property
05
06 Common Settings
Exit
3
Press the [▲] or [▼] key to select [Timer Setting], and press the [OK] key.
Common Settings:
08 Error Handling
Date Setting
09
Timer Setting
10
Exit
4
Press the [▲] or [▼] key to select [Sleep Level], and press the [OK] key.
Timer Setting:
PanelReset Timer
02
03 Low Power Timer
Sleep Level
04
Exit
Select the Sleep level.
Press the [▲] or [▼] key to select [Quick Recovery] or [Energy Saver], and press the [OK] key.
Sleep Level:
01 * Quick Recovery
Energy Saver
02
Exit
When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for
each function.
Set the Sleep rule.
1
Press the [▲] or [▼] key to select the function to be set, and press the [OK] key.
Energy Saver:
01 Network
Card Reader
02
FAX
03
Exit
[Card Reader] is displayed when the optional Card Authentication Kit is installed.
[FAX] is displayed only on products with the fax function installed.
2
Press the [▲] or [▼] key to select [Off] or [On], and press the [OK] key.
Network:
Off
01
* On
02
Repeat steps 3-1 to 3-2 to set for a different function.
1
1
1
1
1
1
2-22
2
2
2
2
2
2