Creating A New Custom Box - Kyocera ECOSYS M3040dn Operation Manual

Installing and Setting up the Machine > Command Center RX

Creating a New Custom Box

You can register a custom box from Command Center RX.
NOTE
To use Custom Box, an optional SSD must be installed in the machine.
1
2
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name. Press the
Menu/Counter] key, [Report], [Report Print], [Status Page], and then press [Yes].
Report
3
From the [Document
4
Click [Add].
Configure the Custom Box.
1
Enter the box details.
Enter the information for the custom box you want to register. For details on the fields to populate,
refer to Command Center RX User Guide.
2
Click [Submit].
Report Print
Box] menu, click [Custom
3
1
2
2-50
Status Page
Box].
[System