Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Item
Report Print
Opt NW Status
Admin Rpt Set. (Admin Report Settings)
Report
Configure settings for fax functions. For details, refer to the FAX Operation Guide.
Result Rpt Set. (Result Report Settings)
Report
Item
Result Rpt Set.
Send Result
FAX RX Result
JobFinish Notice
Prints the optional network status, allowing you to check the information including
optional network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network
Interface Kit is installed.
Admin Rpt Set.
Result Rpt Set.
Automatically print a report of transmission result when a transmission is
complete.
E-mail/Folder
Print a report of E-mail/Folder transmission results.
Value: Off, On, Error Only
FAX
For details, refer to the FAX Operation Guide.
Cancel
Print a send result report when the job is canceled before being sent.
BeforeSend
Value: Off, On
Dest. Info.
Select the Destination Format for the send result report.
Value: Dest. or Name, Dest. and Name
For details, refer to the FAX Operation Guide.
Attaches sent images to job finish notices.
Value: Do Not Attach, Attach SendImage
Description
NETWORK STATUS PAGE
Description
8-6
Advertisement
Table of Contents
Troubleshooting
