Confirmation Screen Of Destinations; Recall - Kyocera ECOSYS M3040dn Operation Manual

Operation on the Machine > Sending

Confirmation Screen of Destinations

When selecting [On] for Destination Check before Send
destinations appears after pressing the [Start] key.
Follow the steps below to confirm the destinations.

Recall

Recall is a function allowing you to send the last entered destination once again. When you want to send the image to
the same destination, press the
destination list.
Destination List:
abcd@efg.com
hijk@lmn.com
Group 01
Cancel Next
1
Press the [▲] or [▼] key to confirm all destination.
To show the detailed information of the destination, select the destination and press the [OK] key.
Select [Detail] and press the [OK] key.
To delete the destination, select the destination you want to delete and press the [OK] key. Select
[Delete], press the [OK] key, and press [Yes] in the confirmation screen. The destination is deleted.
2
Press [Next].
NOTE
Be sure to confirm all destination by displaying them on the message display. You cannot
press [Next] unless you have confirmed all destination.
[Address Recall/Pause] key, and you can call the destination you sent on the
1
Press the [Address Recall/Pause] key.
The destination you sent is displayed on the destination list.
NOTE
When the last sending included FAX, computers and e-mail destinations, they are also
displayed. If necessary, add or delete the destination.
2
Press the [Start] key.
Sending starts.
NOTE
• When [On] is selected in "Check beforeSend", a destination confirmation screen is
displayed when you press the [Start] key. For details, refer to
Destinations on page
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out
(Check beforeSend on page
5-23.
5-23
8-35), the confirmation screen of
Confirmation Screen of