Setting Wia Driver - Kyocera ECOSYS M3040dn Operation Manual

Installing and Setting up the Machine > Installing Software

Setting WIA Driver

Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1
2
Display the screen.
1
Click [Start] button on the Windows and enter [Scanner] in
Click [View scanners and
screen appears.
NOTE
In Windows 8, click [Search] in charms, and enter "View scanners and cameras" in the
search box. Select [View scanners and
and Cameras screen appears.
2
Select the same name as this machine from WIA Drivers, and press [Properties].
1
Configure WIA Driver.
(Network)
1
2
3
4
(USB)
1
2
3
cameras] in the search list then the Scanners and Cameras
cameras] in the search list then the Scanners
2
Enter the machine IP addresses or host name.
When using SSL, select the checkbox beside SSL.
Set units of measurement.
5
Set the Compression Level.
Set units of measurement.
4
2-33
[Program and File Search].