Checking And Editing Destinations - Kyocera ECOSYS M3040dn Operation Manual

Operation on the Machine > Sending
3

Checking and Editing Destinations

Check and edit a selected destination.
1
2
Confirm the information.
The connection confirmation screen appears. Press [Yes] to check the connection and [No] to
not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To send to multiple destinations, repeat steps 1 to 3.
Destinations can be changed later. Refer to
Display the screen.
Referring to Specifying Destination on page
Check and edit the destination.
Press the [Confirm/Add
Add the destination
1
Press [Add].
Dest. Confirm.:
abcd@efg.com
hijk@lmn.com
Group 01
Add Exit
2
Refer to Specifying Destination on page 5-16
Edit the destination
1
Press the [▲] or [▼] key to select the destination you want to edit, and press the [OK] key.
Dest. Confirm.:
abcd@efg.com
hijk@lmn.com
Group 01
Add Exit
2
Press the [▲] or [▼] key to select [Edit], and press the [OK] key.
abcd@efg.com:
Edit
01
02 Delete
3
Refer to Specifying Destination on page 5-16
Checking and Editing Destinations on page
5-16, specify the destination.
Destination] key.
to set the destinations to be added.
1
1
to set the destinations to be added.
5-21
2
2
5-21.