Optional Applications - Kyocera ECOSYS M3040dn Operation Manual

Appendix > Optional Equipment

Optional Applications

Overview of the Applications
The applications listed below are installed on this machine.
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Starting Application Use
Use the procedure below to start using an application.
Application
Data Security Kit
Card Authentication Kit
*1
ThinPrint Option
*1 This can be used on a trial basis for a limited time.
1
Press the [System Menu/Counter] key.
2
Press the [▲] or [▼] key to select [System/Network], and press the [OK] key.
Sys. Menu/Count.:
01 Report
Counter
02
System/Network
03
Exit
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Login User Name
4000
3
Press the [▲] or [▼] key to select [Op Functions], and press the [OK] key.
4
Press the [▲] or [▼] key to select the desired application, and press the [OK] key.
You can view detailed information on the selected application by pressing [Menu], selecting [Detail],
and pressing the [OK] key.
5
Press the [▲] or [▼] key to select [Official], and press the [OK] key.
To use the application as a trial, select [Trial] without entering the license key.
4000
11-9
Login Password