Adding A Destination On One Touch Key (One Touch Key) - Kyocera ECOSYS M3040dn Operation Manual

Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be registered.
NOTE
• Numbers 1 to 11 are the One Touch Key numbers while the
are the One Touch Key numbers while the
• Refer to Specifying Destination on page 5-16
• You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-48)
1
2
[Shift
for use of One Touch Key.
Select the One Touch Key to be registered.
1
In the Send or FAX screen, press the One Touch Key that you want to register and hold it
(2 seconds or more).
2
Press the [▲] or [▼] key to select a key number, and press the [OK] key.
Select Key No.:
01 No. 1
02 No. 12
Exit
Select a One Touch Key number with no registered destination.
Select the destinations.
1
Press the [▲] or [▼] key to select the destination (contact or group) you want to register to
the One touch key from the Address Book.
Address Book:
AAA
BBB
CCC
Menu
NOTE
Press [Menu] and select [Search(Name)] to search using a name.
2
Select the destination to be registered to the One touch key from the destinations
registered in the addresses and press the [OK] key.
3
Press the [OK] key.
The destination will be added to the One Touch Key.
[Shift Lock] indicator is switched off. Numbers 12 to 22
Lock] indicator is switched on by pressing the
1
1
3-39
[Shift Lock] key.
2
2