Table of Contents
Advertisement
Operation on the Machine > Sending
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE
To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
WSD-SCAN on page 8-10
For information on operating the computer, refer to the computer's help or the operation guide of your software.
Installing Driver Software (for Windows 7)
1
2
Installing Driver Software (for Windows 8 and Microsoft Windows Server 2012)
1
2
is set to [On] in the network settings.
Display [Network] in the Start menu.
Click [Start] button on the Windows and then select [Network].
NOTE
When [Network] does not appear in the Start menu, perform the following procedure.
1
Right-click [Start] and click [Property] in the menu that appears.
2
Select the
[[Start]
menu] tab in the
click [Customize].
3
When the
"Customize [Start]
and click [OK].
Install the driver.
Right-click the machine's icon (Kyocera:ECOSYSXXX:XXX) and then click [Install].
NOTE
If the
"User Account
Control" window appears, click [Continue].
If the
"Found New
Hardware" window appears, click [Cancel].
During the installation, double-click the icon shown on the task bar to display the
Software
Installation" screen. When
[Driver Software
Installation] screen, the installation is completed.
Click [Search] in charms,
devices and
printers].
Install the driver.
Click
[Add a
device]. Select the machine's icon (Kyocera:ECOSYSXXX:XXX) and then click
[Next].
When the machine's icon (Kyocera:ECOSYSXXX:XXX) is displayed in "Printers" on the
[Devices and
Printers] screen, the installation is completed.
"Task bar and [Start] menu
menu" screen appears, select the "Network" check box
"Your devices are ready to
[Control
Panel], and then
5-26
properties" screen, and
"Driver
use" is displayed on the
[View
Advertisement
Table of Contents
Troubleshooting
