Editing A Communication In Memory; Printing Out A Sample Image Of Waiting Documents; Force-Starting The Communication - Kyocera FAX SYSTEM Operation Manual

Section 2 Fax Operation (Various Functions)

Editing a Communication in Memory

You can modify certain information relating to a scheduled communication that uses the timer or even cancel the communication completely.
You can also print out a sample image of the corresponding documents as well as initiate (force-start) the communication without waiting for
the actually scheduled start time.
* If the scheduled communication begins automatically while you are in the middle of any editing operation, it will impossible to continue that
procedure.
(1) Printing Out a Sample Image of Waiting
Documents
If you want to check the documents that correspond to a specific
transmission that is in memory and waiting for transmission, you can
print out a sample page of those documents.
* Even if you print out a sample image of the documents, the
transmission will be carried out on schedule.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the "Application" key. The Application screen will appear.
(Inch)
(Metric)
2. Touch the "Reserved TX status" key.
The content of the first schedule communication will be displayed.
(Inch)
(Metric)
3. Use the "M" and/or "L" cursor keys to switch to the communication
that you want.
4. Touch the "Print" key.
5. Touch the "Yes" key. A sample image of the corresponding
documents will be printed out.
2-10

(2) Force-Starting the Communication

You can force-start a communication that is waiting in memory,
without having to wait for the scheduled start time.
* You can also force-start a communication that is waiting for
Automatic Redialing.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Perform steps 1 through 3 of "(1) Printing Out a Sample Image of
Waiting Documents".
2. Touch the "Immediate TX" key.
(Inch)
(Metric)
3. Touch the "Yes" key. The corresponding operation will begin
automatically.