Receiving Documents (Automatic Fax Reception); G Changing The Reception Mode - Kyocera FAX SYSTEM Operation Manual

Receiving Documents (Automatic Fax Reception)

Automatic Fax Reception is the default setting for fax reception in this
machine and no special settings are required for its use.
* Fax reception is possible even if the main switch is turned OFF (O).
If a fax comes in while the main switch is in the OFF (O) position,
that fax reception will still be received and printed out.
Checking the reception mode
Make sure that "Auto RX" is displayed.
(Inch)
(Metric)
Section 1 Fax Operation (Basic Use)
<Reception modes>
This fax machine offers the following 4 or 5 (depending upon the
region of use) ways to receive a fax.
• Automatic Fax Reception
• Manual Fax Reception
• Auto FAX/TEL Switching
• TAD Reception
• D.R.D. Reception

G Changing the reception mode

Touch the reception mode select key when you want to change the
reception mode.
(Inch)
(Metric)
Touch the key that corresponds to the desired reception
mode.
1-19