Hardware Installation; Din-Rail Installation - ORiNG IAP-420 Series User Manual

IAP-420/420+ User Manual
H
ardware Installation

3.1 DIN-rail Installation

The device comes with a DIN-rail kit to allow you to fasten it to a DIN-rail in any
environments.
DIN-rail Kit Measurement (Unit = mm)
Step 1: Slant the device and screw the Din-rail kit onto the back of the device, right in the
middle of the back panel.
Step 2: Slide the device onto a DIN-rail from the Din-rail kit and make sure the device clicks
into the rail firmly.
ORing Industrial Networking Corp. 7