H
ardware Installation
2.1
Wall Mounting Installation
Each AP has another installation method to fix the AP. The following steps show how
to mount the AP on the wall:
Step 1: Use screws that can be found in the package to combine the wall mount
TAP-620-M12.
The screws specification shows in the following two pictures. In order to prevent the
AP from any damage, the screws should not larger than the size that used in
TAP-620-M12.
Step 2: Mount the combined AP on the
ORing Industrial Networking Corp.
TAP-620-M12 User's Manual
wall.
2