ORiNG IAP-420 Series User Manual page 25

When you set security type as WEP, the following fields will appear to allow you to configure
individual settings.
Label
Auth Mode
WEP Encryption
ORing Industrial Networking Corp.
transmitted on the WLAN.
WPA/WPA2 Personal: this will encrypt the link without
additional RADIUS server, only an access point and client
station that supports WPA-PSK is required.
WPA/WPA2 Enterprise: Authentication is achieved via
WPA RADIUS Server. You need a RADIUS or other
authentication server on the network.
802.1x: Authentication through RADIUS server
Description
Available values include Open, Shared, and WEPAUTO. When
choosing Open or Shared, all of the clients must select the
same authentication to associate this AP. If select WEPAUTO,
the clients do not have to use the same Open or Shared
authentication. They can choose any one to authenticate.
You can select 64 Bit or 128 Bit.
IAP-420/420+ User Manual
23