Hardware Installation; Wall Mounting Installation - ORiNG TGAP-620-M12 Series User Manual

Ieee 802.11 a/b/g/n access point with single/dual rf
Table of Contents

Advertisement

H
ardware Installation
Before installing the devices, make sure you have all of the package contents available and a
PC with Microsoft Internet Explorer 6.0 or later, for using web-based system management
tools.
When installed outdoors, make sure the connectors on the panel are facing down
to prevent water intrusion.
Do not remove the water-proof casing, and do not touch or move the device when
the antennas are transmitting or receiving signals.
When installing the device, make sure to keep the radiating at a minimum
distance of 20 cm (7.9 inches) from all persons to minimize the potential for
human contact during normal operation.
Do not operate the device near unshielded blasting caps or in an otherwise
explosive environment unless the device has been modified for such use by
qualified personnel.

3.1 Wall Mounting Installation

ORing Industrial Networking Corp
TGAP-620-/6620-M12 Series User Manual
Wall-mount Measurements
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tgap-6620-m12 series

Table of Contents