ORiNG IAP-420 Series User Manual page 21

Label
Obtain an IP address
automatically
Use the following IP
address
Obtain DNS server
address
automatically
Use the following
DNS server
addresses
Web Protocol
Preferred DNS
Secondary DNS
ORing Industrial Networking Corp.
Description
Select this option if you want the IP address to be assigned
automatically by the DHCP server in your network.
Select this option if you want to assign an IP address to the
device manually. You should set up IP address, subnet mask,
and default gateway for the device.
IP Address: The device comes with default IP address, but you
can also input a new IP address.
Subnet Mask: 255.255.255.0 is the default value. All devices on
the network must have the same subnet mask to communicate
on the network.
Default Gateway: Enter the IP address of the device in your
network.
Obtains a DNS server address from a DHCP server. If you have
chosen to obtain an IP address automatically, this option will be
selected accordingly.
Specifies a DNS server address manually. You can enter two
addresses as the primary and secondary options.
You can choose to use HTTP or HTTPS protocols. The latter has
a higher security level.
Input the IP address of the DNS server you prefer to use
Input the IP address of another DNS server
IAP-420/420+ User Manual
19