Table of Contents
Advertisement
H
ardware Installation
The device can be fixed to a pole or the wall using the supplied mounting kits.
Beforeinstalling the device, make sure you have all of the package contents available and a
PC with Microsoft Internet Explorer 6.0 or later, for using web-based system management
tools.
When installed outdoors, make sure the LAN ports are covered by RJ-45 rubber
seals provided with the package.
Do not remove the water-proof casing, and avoid touching or moving the device
when the antennas are transmitting or receiving.
When installing the device, make sure to keep the radiating at a minimum
distance of 20 cm (7.9 inches) from all personsto minimize the potential for
human contact during normal operation.
Do not operate the device near unshielded blasting caps or in an otherwise
explosiveenvironment unless the device has been modified for such use by
qualified personnel.
ORingIndustrial Networking Corp
IAP-W420/W422 UserManual
8
Advertisement
Table of Contents
