01/FORK, TRIPLE CLAMP
Disassembling the fork legs
5.13
Info
The steps are identical for both fork legs.
–
Disassemble the fork legs. (
–
Disassemble the cartridge. (
–
Check the fork legs. (
–
Assemble the cartridge. (
–
Assemble the fork legs. (
200979-01
Condition
The fork legs are disassembled.
–
Remove protective cover
–
Note down the present state of rebound damping
–
Note down of the present state of the spring preload.
–
Completely open the adjusters of the rebound damping and compression damping.
200736-10
–
Clamp the fork leg in the area of lower triple clamp.
Clamping stand (T1403S) (
201347-10
–
Loosen Preload Adjuster
Pin wrench (T103) (
Info
The Preload Adjuster cannot be taken off yet.
200737-10
p. 17)
p. 20)
p. 22)
p. 24)
p. 26)
.
A
and compression damping
1
p. 283)
.
3
p. 279)
17
.
2