Rs-232C Interface Model - Star TSP700II series Hardware Manual

11-2. RS-232C Interface Model

ON
OFF
No. 1 2 3 4 5 6 7 8
Switch 1-1
The factory settings of DIP switch are all on.
The functions of switches 1-2 through 1-10 will change according to the command emulation
that has been set using switche 1-1.
(1) Star mode
Switch
1-1 Command emulation
1-2 Should not be changed (Should be set to on)
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
1-9 Low-power consumption mode
1-10 Should not be changed (Should be set to on)
(2) ESC/POS mode
Switch
1-1 Command emulation
1-2 Graphic adjustment
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
1-9 Low-power consumption mode
1-10 Should not be changed (Should be set to on)
9 10
DIP-SW 1
ON
OFF
Function
Function
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 1
Always ON
Invalid
Offline or receive
buffer full
Invalid
Invalid
Always OFF
203 DPI
Invalid
Offline or receive
buffer full
Invalid
Invalid
– 43 –
Command emulation
Star Mode
ESC/POS Mode
ON
Valid
Receive buffer full
Valid
Valid
ON
180 DPI
Valid
Receive buffer full
Valid
Valid
OFF
OFF