Input Selector Buttons; Vol/Bal Button; Mute Button; Purcell Button And Led - DCS Elgar Plus User Manual

dCS Elgar Plus User Manual
dCS Ltd
Input Selector Buttons
Vol/Bal Button
Mute Button
Purcell Button and LED
Phase Button
Filter Button
Display button
(↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ )
Up and Down / buttons
Manual filename: Elgar Manual v4.4x.doc
English version
(γ)
Select individual inputs with the AES1, AES2, RCA1,
buttons. The button steps through all the available inputs in sequence,
Input
giving access to those without an individual button. For
suitable source, select
(δ)
Switches between
(κ)
buttons or the Rotary Control on the front panel to alter the settings.
mode times out after 5 seconds, reverting to
Balance
(ε)
Press this to mute or unmute the Analogue Outputs.
Purcell units fitted with software version 1.20 or later and all Grieg units will
accept commands from the Remote Control. Press the
the blue LED will light up for about 5 seconds. During this time, the Standby,
selector, Filter,
Function, Input
Upsampler instead of Elgar Plus.
Sending a Purcell command will keep the Remote Control in Purcell mode (and
the LED on) for another 5 seconds. Press the
blue LED is lit to return to Elgar Plus mode (or just wait 5 seconds).
If the blue LED is on, the Upsampler will respond. If it is off, Elgar Plus will
respond.
(θ)
Changes the Phase of the analogue outputs to Inverted. The
indicator on the Front Panel will light. Press again to return to Normal.
(η)
Changes the interpolation filter setting, giving a different trade-off between
Nyquist image suppression and energy smear. Each sample rate has a
separate Filter setting stored, so Elgar Plus must be locked to a suitable source
before the Filter setting can be changed. This feature is duplicated in the Menu,
Filter
see on page 20.
(ι)
Each press reduces the display brightness on a scale from
Bright 0.
(κ)
Use these buttons
the Function Menu, see page 19.
and press the
AES2 Input
mode and
Volume Balance
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
, and
to change and
Volume
Page 43
Manual for Software Issue 4.3x
August 2005
RCA2
AES, connect a
Dual
button.
mode. Use the
mode.
Volume
button
Purcell
buttons will control the
Display
button again while the
Purcell
Bright 7
settings or scroll along
Balance
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
&
BNC
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
and
(ζ)
and
Phase
to