Step 1 - Connecting An Input - DCS Scarlatti Upsampler User Manual

dCS Scarlatti Upsampler User Manual Software Issue 1.1x
August 2011

STEP 1 - Connecting an Input

Use suitable cables to connect your source equipment to the matching digital input connectors on the
back panel of the Scarlatti Upsampler. The digital inputs are labelled in green print. The unit will
accept up to 24-bit data at 32, 44.1, 48, 88.2 or 96kS/s. You can connect any interfaces you need or
all 6 if you wish.
Use the button on the front panel to select the input you require, the choices are:
INPUT
AES RCA1 RCA2 BNC TosLink USB
The icon for the selected input will appear at the top left corner of the screen. If the source is
generating recognisable PCM, the Upsampler will lock, displaying and the input / output sample
Sync
rates. For example, when connected to an AES source generating 16/44.1 data:
16/44.1>24/96
Sync
Go to STEP 2.
Page 7
Filename: Scarlatti Upsampler Manual v1_1x.docx English version