Erratic Operation When Locked To 96 Or 88.2Ks/S On; The Unit Will Not Decode Dual Aes; The Unit Drops Out Of Dual Aes Mode Into; Aes1 Or Aes2 - DCS Elgar Plus User Manual

dCS Elgar Plus User Manual
dCS Ltd

Erratic operation when locked to 96 or 88.2kS/s on

The unit will not decode Dual AES

The unit drops out of Dual AES mode into

A digital recorder fails to record from the

Manual filename: Elgar Manual v4.4x.doc
English version
•
Check your optical connections are clean and properly installed.
•
The Toslink and ST receiver devices are industry standard types which are
not guaranteed to operate correctly at 96 or 88.2kS/s. Connect to a different
input instead.
•
Dual AES mode may be disabled. Open the menu and set the
On
page to (see page 23). Connect a valid 88.2, 96, 176.4 or 192kS/s Dual
AES source to both
button repeatedly until both
•
Your source equipment may have two AES outputs but might not be
capable of Dual AES operation. Check the manual for the source
equipment.
•
Dual AES mode is only available if AES data streams are available on both
and
AES 1 AES 2
Dual AES
in mode, the unit may default to single AES mode and select the
valid input. Check for faulty wiring to the input which has been deselected.
Once both data streams are stable again,
using the button or the Remote Control. See page 23.
Input
•
If you are driving Elgar Plus direct from an Upsampler always set to output
Dual AES, you may find that changing inputs on the Upsampler causes
Elgar Plus to fall out of
Dual AES
locked in
Dual AES page. Change the setting to Lock. Select
the
input on Elgar Plus and it will enter
23).
REC
•
If Elgar Plus is selected to an SPDIF input (RCA, BNC,
and the source data (CD for example) is copy protected, your recorder will
be prevented from recording the data. This prevents copyright infringement.
Note that AES data streams have no Copy Prohibit flag.
•
In some DAT machines, the digital input is connected directly to a digital
output without buffering. This arrangement does not comply with the
IEC60958 standard. Connecting another device to this may overload Elgar
output and corrupt the digital data.
REC
Plus'
•
The output is usable with single AES, RCA, BNC,
REC
inputs ONLY.
Toslink or ST
and
AES 1 AES 2
and
AES1 AES2
AES1 or AES2
inputs. If either are interrupted or become corrupted while
Dual AES
mode. To prevent this, Elgar Plus may be
mode. Open the menu and page through until you reach
Dual AES
Output
Page 67
Manual for Software Issue 4.3x
August 2005
inputs
inputs. Press the
Input
indicators are lit.
Dual AES
mode may be selected
AES 1
mode automatically (see page
or TOSLINK)
ST
Toslink
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
Dual AES
selector
or
AES 2
or
ST