Swap - Swap Channels; Disp - Default Display; Bal Mode - Balance Information Display; Global - Global/Local Volume - DCS Elgar Plus User Manual

dCS Elgar Plus User Manual
dCS Ltd
Swap Swap Swap Swap
- Swap Channels
do this:
do this:
do this:
Disp Disp Disp Disp
- Default Display
do this:
do this:
Bal Mode Bal Mode
Bal Mode Bal Mode
- Balance Information Display
do this:
do this:
Global Global Global Global
– Global/Local Volume
Manual filename: Elgar Manual v4.4x.doc
English version
If you have run the Channel Check test and decided the channels are reversed,
you can swap the channels back digitally as follows.
Assuming the unit is set for swap off, open the Function Menu and step through
until the display shows Swap:Off.
Press the button once.
Select
The display will change to Swap:On.
Run through this sequence again if you want to swap back.
Swap
The setting is NOT remembered when you switch off. If your channels
are swapped, check the wiring between units and correct the error.
This feature allows you to choose what Elgar Plus displays when music is
playing
Open the Function Menu and step through until you come to the
Press the button repeatedly and the display will cycle through the
Select
following :
Disp:Vol
The display reverts to Volume after time-out (e.g.
Vol
Disp:Fs
The display reverts to Sample Rate after time-out (e.g.
44.1kS/s).
Disp:Fs+
The display reverts to Input Bits + Sample Rate (format)
after time-out (e.g. 24/192). If receiving digital silence, 0
input bits will be correctly displayed.
Disp:Inp
The display reverts to the selected input after time-out
(e.g. AES1).
Choose whichever you prefer and wait for time-out.
Use this to select one of two types of balance display.
Open the Function Menu and step through until the display shows
Bal:Num.
Press to change between the two.
Select
Bal:Bar
displays the channel balance as two bars, this may be easier to read
from a distance:
Balance Central
▌▌▌▌▐▐▐▐
Balance to left
▌▌▌▌
Balance to right
▐▐▐▐
Bal:Num
displays channel balance as two percentages:
100% 100%
Balance central
100% 0%
Balance to left
0% 100%
Balance to right
Elgar Plus can store
Volume
-12.0).
settings in two ways:
Page 24
Manual for Software Issue 4.3x
August 2005
Disp
Bal:Bar
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
page.
or