Mute - Mute Fade Time; Fade - Fade Behaviour After Re-Lock - DCS Elgar Plus User Manual

dCS Elgar Plus User Manual
dCS Ltd
Mute Mute Mute Mute
- Mute Fade Time
do this:
do this:
Fade Fade
Fade Fade
– Fade Behaviour After Re-Lock
do this:
do this:
Manual filename: Elgar Manual v4.4x.doc
English version
If you are using an Upsampler set for DSD output and your Elgar Plus is fitted
with a 1394 interface, select the
then and
MS:Mastr 1394
If you attempt to use a input sample rate that is not a multiple of 44.1kS/s (for
example 192kS/s), the unit will detect this and the following message will scroll
across the display:
"Can't Use Input Frequency in Master Mode. Press ..... Button to
If you press the button mentioned in the scrolling message
for Elgar), the selected input will be reset to Slav.
Phase
If you get stuck, use the
This sets the length of the fade-out time before muting and the fade-in time
before unmuting.
Open the Function Menu and step through until you come to the
Press the button repeatedly and the display will cycle through:
Select
Mute:Nor
Normal muting – audio fades up and down in 0.5
seconds.
Mute:Fst
Fast muting – audio fades up and down instantly.
Mute:Slw
Slow muting – audio fades up and down in 2 seconds.
Choose whichever you prefer and wait for time-out.
This feature fades the audio signal up gradually after locking to a source or
changing inputs
Open the Function Menu and step through until you reach the
display shows
Fade-Off
Press the button to toggle between these settings and wait for time out.
Select
Fade set to On, the unit will take longer to respond to some commands as
With
nothing will change until the fade up / down is complete.
input. The displays will then be Wait...,
1394
alternately for about 10 seconds.
Rst Sync
menu to reset the unit.
or Fade-On.
Page 22
Manual for Software Issue 4.3x
August 2005
Slave"
(Function for Delius,
Mute
Fade
page. The
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
page.