Table of Contents
Advertisement
dCS Rossini Transport User Manual
R
P
EAR
ANEL
J
AES Digital Outputs
AES1
AES2
The
and
SACD is playing. When playing a CD, the outputs can be set to output either encrypted
(24 bits at 352.8kS/s) or
Upsample Mode
menu page.
The
DSD
Rossini Player, Scarlatti DAC v1.30, Paganini DAC v1.30 or Debussy DAC v2.30.
!
Encrypted DSD mode is unlikely to be compatible with other manufacturer's products.
The
DSDx2
Rossini Player or Debussy DAC v2.30.
AES3
The
output carries 16/44.1 data whether a CD or SACD is playing.
SPDIF Digital Outputs
The unit features two co-ax SPDIF outputs, labelled
BNC connector). Both output 16/44.1 format data, whether a CD or SACD is playing.
Word Clock Input / Output
Word Clock In
The
connector (N) will accept standard word clock at 44.1 or 88.2 or 176.4kHz from a
master clock or a DAC in master mode.
Once the unit has locked to the external clock, this icon appears on the display.
Word Clock Out
The
connector (P) carries a 44.1kHz word clock.
Word clock is used for synchronisation only, it does not carry digital data.
IR Remote Receiver
This secondary IR remote receiver (O) is intended to be used with a household automation system, as
an alternative to RS232.
Rossini Transport Manual v1_0x
K
L
M
N O P
Figure 5 – Rear panel
outputs (J) form a Dual AES pair. They output encrypted DSD data when an
DSDx2
(1 bit at 5.644MS/s), depending on the setting of the
AES1+2
is the main output.
and
DXD
output modes are compatible with the Vivaldi DAC, Rossini DAC,
output mode is compatible with Vivaldi DAC v2.00 onwards, Rossini DAC,
SPDIF1
(L – RCA connector) and
Page 19
Software Issue 1.0x
September 2018
Q
R S T
U
DSD
Settings >
SPDIF2
English version
or
DXD
(M –
Advertisement
Table of Contents
