Notes On The Use Of 200V Power Supply - Fujitsu SPARC T5440 User Manual

Software running in different guest domains on the same physical machine might
see the same or different sets of virtual processor IDs. If domaining is enabled, the
virtual processor IDs and physical processor IDs are never the same. For information
about the mapping between virtual and physical CPU numbers, see the latest Logical
Domains (LDoms) Administration Guide.
Processor IDs are simply unique integer values in the domain where the software is
running. The integer value will fit in the type processorid_t. Also refer to the
p_online(2) man page.

Notes on the Use of 200V Power Supply

For the servers that have the B-type plug, confirm that a 15A overcurrent protection
device is available outside the server. If one is not available, prepare an external 15A
overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or
fuses. The B-type plug refers to plugs other than grounding-type ones with two
parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
For details of the power cord type for your server, contact your authorized service
engineer.
Chapter 2 Important Information About the SPARC Enterprise T5440 Server 27