Fujitsu SPARC T5440 User Manual page 50

ILOM Issues (Continued)
TABLE 3-4
CR ID Description
6940465 When the power supply temporarily suspended
due to events such as power failure, the message
as below may be displayed in the ILOM event
log.
2410
Chassis
Mar 31 04:06:49 ERROR: [CMPx
] Received Fatal Error
The error detecting point may be [ZAMx ] in
some cases.
6659980 When you restarted Solaris OS, OpenBoot
PROM may output the error message "ERROR:
Unable to disown USB port 3."
For details, see
OpenBoot PROM May Output the Error
Message (CR 6659980)" on page
After a Host Power-On Instruction Is Executed
from ILOM, the POST May Not Start, and
Processing May Not Go to OS Boot Processing or
the ok Prompt (CR 6752910)
After a host power-on instruction is executed from ILOM, the POST (self-diagnostics
test) may not start, and processing may not go to OS boot processing or the ok
Prompt for OpenBoot PROM (OBP).
[ILOM command interface operation example]
-> start /SYS
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
[ALOM CMT compatibility shell operation example]
sc> poweron
sc> console
Enter #. to return to ALOM.
40 SPARC Enterprise T5440 Server Product Notes • December 2010
Wed Mar 31 04:06:49 2010
Log major
"When You Restarted Solaris OS,
45.
Workaround
None.
After the power supply recovered, use the ILOM
CLI interface and execute the show faulty
command. When there is no hardware error
output, this message can be safely ignored.
None.
This message has no impact on the system and
the USB device, and can be safely ignored.
To stop, type #.