Fujitsu SPARC T5440 User Manual page 51

Nothing is displayed on the OS console. Entering the escape character "#." restores
the ILOM prompt. The result of the Domain Status may vary. No power-on log item
as been recorded in the event log.
[showplatform command and showlogs command domain status reference
example]
sc> showplatform
SUNW,SPARC-Enterprise-T5440
Domain Status
------ ------
S0 Powered off * Domain Status : "Powered on", "Powered off", "OpenBoot
initializing", "Unknown" etc.
sc>
sc> showlogs -p p
Log entries since Sep 29 12:45:39
----------------------------------
Sep 29 12:45:39: Chassis |major
Sep 29 12:49:28: Chassis |major
Sep 29 12:49:43: Chassis |critical: "Host has been powered off"
Sep 29 12:50:47: Chassis |major
Sep 29 12:54:35: Chassis |major
Sep 29 12:54:51: Chassis |critical: "Host has been powered off" * There is no
"Host has been powered on." log entry after this.
sc>
The ILOM Network Configuration Cannot Be Set
(CR 6835854, 6779753)
In case that the NET-MGT port of ILOM has not been connected with the LAN cable
and the network gateway is not set, the ILOM network configuration cannot be set.
Output example when the settings cannot be applied:
-> set /SP/network/ pendingipdiscovery=static
Set 'pendingipdiscovery' to 'static'
-> set /SP/network/ pendingipaddress=192.9.200.33
Set 'pendingipaddress' to '192.9.200.33'
-> set /SP/network/ pendingipnetmask=255.255.255.0
Set 'pendingipnetmask' to '255.255.255.0'
: "Host has been powered on"
: "Host is running"
: "Host has been powered on"
: "Host is running"
Chapter 3 Known Issues 41