Contents - Fujitsu SPARC T5440 User Manual

Fixed ILOM Issues (Continued)
TABLE A-3
CR ID Description
6823516 In the DNS client settings, the number of retries
(retries property) cannot be set to "5."
6823725 Once you set the searchpath property of the
DNS client function, you cannot change it back
to the default value (none).
6856163 If the service processor is initialized with the
LAN cable disconnected from the ILOM
network port, the ILOM firmware serial console
window displays an error message indicating a
failure to start an ILOM internal process. As a
result, ILOM fails to start.
For details, see
Initialized, ILOM May Fails to Start With an
Error Message Displayed (CR 6856163)" on
page 70.
6857271 During SCC module replacement, part of the
data kept on the motherboard is inadvertently
overwritten with new SCC module data. This
results in a connection failure to the ILOM
network.
For details, see
Replacement, a Connection to the ILOM
Network May Fail (CR 6857271)" on page
6854379 After the replacement of motherboard, the
values for properties stored in the /HOST/diag
directory may not be carried over, even though
system configuration card (SCC module) is
moved to the new motherboard.
6816507 After mounted the 10GbE XAUI card, when you
insert the power cable, the component
information of the 10GbE XAUI card does not
appear on ILOM. ILOM recognized the 10GbE
XAUI card.
66 SPARC Enterprise T5440 Server Product Notes • December 2010
"When the Service Processor Is
"After the SCC Module
Workaround
Note - Fixed in System Firmware 7.2.7.b or
later.
None.
Set the integer between "0" and "4" to the
number of retries.
Note - Fixed in System Firmware 7.2.7.b or
later.
None.
Note - Fixed in System Firmware 7.2.7.b or
later.
Initialize the service processor with the LAN
cable connected to the ILOM network port.
As long as the network port is linked up, the
service processor can be initialized, even
without ILOM network settings.
For procedures to restore normal system
operation, see "When the Service Processor Is
Initialized, ILOM May Fails to Start With an
Error Message Displayed (CR 6856163)" on
page 70.
Note - Fixed in System Firmware 7.2.7.b or
later.
If only the SCC module fails, replace the SCC
module together with the motherboard.
After replacing these components, restore the
backed up contents.
71.
Note - Fixed in System Firmware 7.2.7.b or
later.
None.
Before replacing the motherboard, back up the
ILOM settings. After the replacement, restore the
backed up settings.
Note - Fixed in System Firmware 7.2.7.b or
later.
None.
To confirm the component information of the
10GbE XAUI card from ILOM, check it after you
power on the host.