Firmware And General Software Issues - Fujitsu SPARC T5440 User Manual

FRU Status in the prtdiag -v command output:
# prtdiag -v
...
=========================== FRU Status ===========================
Location
------------------------------------------------------
...
SYS/MB/RISER1/PCIE1
...
Workaround:
None. This can be safely ignored. To check the fibre channel card mount, use IO
Devices of the prtdiag command of Solaris OS.
The prtdiag command execution result:
# prtdiag
...
=========================== IO Devices ===========================
Slot +
Status
-----------------------------------------------------------------
...
MB
...

Firmware and General Software Issues

TABLE A-4
Fixed Firmware and General Software Issues
TABLE A-4
CR ID Description
6731027 Under certain conditions, the system might not
power off when the Solaris OS is halted. The
system might appear unresponsive in this case
with no messages in at the system console or on
the SC console.
76 SPARC Enterprise T5440 Server Product Notes • December 2010
Bus
Type
FIBRE fibre-channel
lists the firmware and general software issues that have been fixed.
Name
F20CARD
Name +
Path
/pci@500/pci@0/pci@9/fibre-channel
Workaround
Note - Fixed in System Firmware 7.1.8.a or later.
Power off the system using one of the following
methods:
• The ILOM stop/SYS command
• The ALOM poweroff command
Status
enabled
Model