Fujitsu SPARC T5440 User Manual page 81

Hide thumbs Also See for SPARC T5440:

Table of Contents

If this problem occurs, restore normal system operation by using the following

procedure:

1. Disconnect the power cable.

2. Connect the LAN cable to the ILOM network port.

Verify that the ILOM network port is linked up.

3. Connect the power cable.

After the SCC Module Replacement, a Connection

to the ILOM Network May Fail (CR 6857271)

This issue is resolved by updating the system firmware to 7.2.7.b or later.

During SCC module replacement, part (*1) of the data kept on the motherboard is

inadvertently overwritten with new SCC module data (*2). This results in a

connection failure to the ILOM network.

(*1) SCC module data including ILOM user data, network setting data, and

diagnostics data. For details, see the ILOM Supplement for each server.

(*2) The data is initialized at this point in time, so the data has no set values.

Also, the following type of log is output (*) to the ILOM serial console window at

the occurrence of the failure. sccd fails to start at ILOM startup:

Example of output to ILOM serial console at failure occurrence:

SUNSP-BEL07482AU login: root

Password:

Waiting for daemons to initialize...

Timed out waiting for daemons to start

sccd daemon has shutdown

Integrated Lights Out Manager

Version 3.0.3.20.e

Use is subject to license terms.

Warning: password is set to factory default.

<-- (*2)

Appendix A

Fixed Issues

Table of Contents