Lock Other / Lock All - FOR-A MFR-1616 Operation Manual

6-3-2. LOCK OTHER / LOCK ALL

The Lock Other and Lock All functions disable crosspoint changes for current destination
channels to all other units or all units including the unit that enabled the Lock function. Lock
functions can be disabled only from the unit that enabled the function.
In multi-panel operation, lock functions can be disabled from any remote control panel in the
operation system. Lock Other does not disable operation of remote control panels in the
system.
 Enabling LOCK OTHER/LOCK ALL
<Setting on the Remote Control Panel>
(1) Assign LOCK OTHER or LOCK ALL to a button on the remote control unit.
 See section 5-3-3-12 "BTN ASSIGN" and 5-4-2. "Button Assignment Change."
(2) Press the assigned button to enable the Lock function.
RU (Local)
RU (Local)
<Setting in the Web-based Control>
Open the [Web-based Control: Lock Destination page, and assign a lock button.
 Disabling LOCK OTHER/LOCK ALL
Press the lock button again.
The Lock function can be disabled from other units than the one that enabled the Lock
function by holding down the LOCK button at least 10 seconds.
If LOCK OTHER or LOCK ALL is ON:
On the remote control panel:
 LOCK LED illuminates
Orange, if LOCK OTHER is issued by itself.
Red, if LOCK OTHER is issued by another unit.
Red, if LOCK ALL is issued by any unit.
 The LOCK button is highlighted (background illuminates)
To check the LOCK status, press the current destination button.
The MENU display shows the LOCK status and the number of the unit that issued the LOCK
command.
DST: 8 [DST8
LK-ID: 103[OTHER PANELS]
LOCK OTHER ON
DST: 8 [DST8
LK-OFF [NOT LOCKED ]
LOCK OFF
The LOCK button and LOCK LED on the remote control unit flash if any inhibited operation
such as selecting a source channel is performed when Lock Other (or Lock All) is enabled
and the LOCK OTHER (or LOCK ALL) button is assigned.
RU RU
RU RU
]
]
79
RU MU
RU MU
DST: 8 [DST8
LK-ID: 103[ALL PANELS ]
LOCK ALL
]