Operation Using The Menu Display (Mfr-16Rud); Crosspoint Switching - FOR-A MFR-1616 Operation Manual

5-4. Operation Using the Menu Display (MFR-16RUD)

The MFR-16RUD, a remote control unit with a display, allows you to select destination channels
and switch crosspoints using the menu display.
Function button assignments are also possible.
 Default Display
The name of Current Destination Channel is displayed on the first line.
The name of Source Channel selected for Current Destination is displayed on the second
line.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)

5-4-1. Crosspoint Switching

To switch crosspoints on the MFR-16RUD, proceed as follows:
(1) Press the UP or DOWN button to change Current Destination to the desired number.
(DST 5 in this example)
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
(2) Press ENTER.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
The cursor automatically moves to the second line (Source side). Press UP or DOWN to
select a source channel.
Note that source names blink during the selection.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
D DST 1
S： SRC 1
D DST 5
S： SRC 5
D： DST 5
S SRC 5
D： DST 5
S SRC 8
57
MFR-16RUD
ENTER
REMOTE CONTROL UNIT
CANCEL
MFR-16RUD
ENTER
REMOTE CONTROL UNIT
CANCEL
MFR-16RUD
ENTER
REMOTE CONTROL UNIT
CANCEL
MFR-16RUD
ENTER
REMOTE CONTROL UNIT
CANCEL