Button Assignment Change - FOR-A MFR-1616 Operation Manual

(3) Press ENTER to perform the crosspoint switch. The screen will return to the default
display.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)

5-4-2. Button Assignment Change

To change button assignments, proceed as follows:
(1) Press a button while holding down ENTER. The button will blink.
POWER
BUSY SETUP
LOCK RESET
The first line will display the function and its parameter currently assigned to the button
and the second line will display its detailed information.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
(2) Press UP or DOWN to select a function to be assigned. Press ENTER to apply the
change.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
(3) The display changes to the parameter selection according to the selected function.
Press UP or DOWN to select the parameter value. Press ENTER to confirm the selection.
The cursor will move to the next parameter if there are two or more parameters. Set the
value and press ENTER in the same way.
Note that parameters blink during the selection.
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
When all settings are finished, the screen automatically returns to its default display.
D： DST 5
S SRC 8
A B
DESTINATION 5
[DST 5
SOURCE
SOURCE 1
[SRC 1
58
ENTER
CANCEL
PAGE A
LOCK PANL
(HOLD 3SEC)
PAGE B
LOCK DEST
(HOLD 3SEC)
ENTER
]
CANCEL
ENTER
CANCEL
ENTER
]
CANCEL
MFR-16RUD
REMOTE CONTROL UNIT
MFR-16RUD
ENTER
REMOTE CONTROL UNIT
CANCEL
MFR-16RUD
REMOTE CONTROL UNIT
MFR-16RUD
REMOTE CONTROL UNIT
MFR-16RUD
REMOTE CONTROL UNIT