Pc-Lan[Mu]; Ru Conn Id - FOR-A MFR-1616 Operation Manual

5-5-3. PC-LAN[MU]

The PC-LAN[MU] menu allows you to display the network settings for the PC-LAN port on the
MU and restart the port.
SETUP>PC-LAN[MU]>
Selecting NET allows you to display the network port settings.
Turning the control knob allows you to scroll through all network settings.
PC-LAN[MU]>IP ADDRESS
192.168.001.012
PC-LAN[MU]>SUBNET MASK
255.255.255.000
PC-LAN[MU]>GATEWAY
000.000.000.000
Selecting GUI REBOOT allows you to restart the network port.
SETUP>PC-LAN[MU]>
SETUP>PCLAN[MU]
EXEC: NO <ENT>
To restart the port, turn the control knob to select YES, then press the control knob.
To cancel the process, turn the control knob to select NO. The display will return to the initial
SETUP menu page.
The following message will appear while restarting the port.
PC-LAN[MU]>GUI REBOOT
Startup...

5-5-4. RU CONN ID

This menu allows you to set the ID for remote control panel IDs to be recognized in the
integrated use of multiple remote control panels.
SETUP>RU CONN ID
UNIT ID: 0<ENT>
Turn the control knob to select an ID, and press the knob to confirm the selection. See
section 5-8-2 "Enabling Multi-Panel Operation" for details.
Do not turn the power of the remote control panel off before the orange BUSY lamp
goes off when changing ID. Doing so will obstruct the settings to be applied.
NET <ENT>
<ENT>
<ENT>
<ENT>
GUI REBOOT<ENT>
IMPORTANT
61