Ru Connect; Brightness; Btn Assign; Ver/Alarm - FOR-A MFR-1616 Operation Manual

5-5-5. RU CONNECT

This menu allows you to enable or disable integrated operation of connected multiple remote
control panels.
SETUP>RU CONNECT
ENABLE:OFF<ENT>
Turn the control knob to select ON or OFF, and press the knob to confirm the selection.
Do not turn the power of the remote control panel off before the orange BUSY lamp
goes off when changing ID. Doing so will obstruct the settings to be applied.

5-5-6. BRIGHTNESS

This menu allows you to set the brightness for the button LCDs and menu display.
SETUP>BRIGHTNESS
BTN:8 MENU:8<ENT>
Turn the control knob to select the brightness. Press the control knob to change the BTN and
MENU selection. Pressing the control when MENU is selected confirms the changes. After
settings are complete, press the CANCEL button to exit the menu.
Brightness: (dark) 1 to 8 (bright)

5-5-7. BTN ASSIGN

This menu allows you to assign functions to buttons. The functions that are the same as
those assignable in the Setting mode BTN ASSIGN menu (SETTING > BTN ASSIGN) can be
assigned.
SETUP>BTN ASSIGN
BTN NO: 1<ENT>

5-5-8. VER/ALARM

This menu displays the version and alarm information. Turn the control knob to scroll the
page.
Ver.0.05.1
PS1： Normal

5-5-9. REBOOT

This menu allows you to execute the restart of the remote control panel.
SETUP>REBOOT
EXEC:NO <ENT>
Turn the control knob to select YES or NO, and press the knob to confirm. Selecting YES
restarts the remote control panel. Pressing NO returns to the menu display to select menus.
IMPORTANT
62