Setup Menu (Mfr-18Ru); Displaying Network Settings; Changing The Ru Network Settings - FOR-A MFR-1616 Operation Manual

5-6. Setup Menu (MFR-18RU)

The SETUP button allows you to enter Setup Menu mode, in which RU and MU PC-LAN
network settings are displayed, the MU-PC LAN port can be rebooted and RU network settings
can be changed. The left three buttons are used to select information to be displayed or the
PC-LAN reboot. To exit Setup Menu mode, press the SETUP button again.
Selection buttons
(See the figures below)
Button A
Button B
Button C

5-6-1. Displaying Network Settings

 To Display RU IP Address and Subnet Mask
Press SETUP to enter the Setup Menu mode. The RU IP address and subnet mask are
displayed as shown below. (If Button A is off (unlit), press Button A.)
POWER
BUSY SETUP
LOCK RESET
 To Display PC-LAN IP address, Subnet Mask and Default Gateway of MU PC-LAN
Press Button B in Setup Menu mode. The network settings are displayed as shown below in
"IP address, Subnet Mask and Default Gateway" order.
POWER
BUSY SETUP
LOCK RESET

5-6-2. Changing the RU Network Settings

(1) Press SETUP to enter the Setup Menu mode. The RU IP address and subnet mask are
displayed as shown below. (If Button A is off (unlit), press Button A.)
POWER
BUSY SETUP
LOCK RESET
(2) Press and hold down a button below the number for change. The number will blink.
(3) Turn the control knob to change the number value. To clear the number setting, press and
hold down the button.
LAN Port
Remote Control Unit (RU)
PC-LAN on Main Unit (MU)
PC-LAN on Main Unit (MU)
63
Display / Execution
IP address display and change
Subnet mask display
IP address display
Subnet mask display
Default gateway display
Reboot
REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
MFR-18RU
MFR-18RU
MFR-18RU