Table of Contents
Advertisement
Figure 4 Securing chassis to the rack
5. Lock the position of the rear post bracket ears using the included position-locking screws.
Figure 5 Locking the position for the rear post bracket ears
Install Transceivers
Hold the transceiver by its sides and gently insert it into the switch until it clicks into place. When a
transceiver is inserted, the switch will authenticate it. This will typically take 1-3 seconds, with the worst case
being 5 seconds.
Aruba 9300-32D Switch Series | Installation and Getting Started Guide
32
Advertisement
Table of Contents
Troubleshooting
