Global Mode Encoders & Functions; Cue Control - SoundCraft Si Compact User Manual

Hide thumbs Also See for Si Compact:

Table of Contents

GLOBAL MODE ENCODERS AND FUNCTIONS

The Global Mode encoders offer control of a key parameter across all channels or buses currently

active on the surface:

1. GLOBAL 'GAIN/TRIM' key: press to make all the encoders function as the input GAIN (or TRIM

2. GLOBAL 'FILT' key: press to make all the encoders function as the input HPF for all the channels

3. GLOBAL 'PAN' key: press to make all the encoders function as the PAN for all the channels or

CUE CONTROL — see also CUE LIST

1. CUE LIST key: press when lit to bring the CUE LIST

2. STORE key: press to STORE a new cue at the end

3. NEXT key: press the NEXT key when lit to recall the

4. RECALL key: Press the RECALL key when lit to recall again the currently active cue OR if the

for LINE & DIGITAL sources) for all the channels on the currently active input fader layer.

NOTE: This key has no function in BUS or MATRIX modes.

on the currently active input fader layer.

NOTE: This key has no function in BUS or MATRIX modes.

buses on the channels on the currently active input or bus fader layer.

NOTE: This key has no function in MATRIX mode.

NOTE: when mixing to a stereo bus using the tOTEM follow keys the global encoders will

switch to PAN mode and shall act as the PAN or BALANCE control from the channels to

the bus.

menu to the touch screen.

of the use list.

NOTE: Pressing and Holding ALT, then pressing

STORE will insert a new cue after the current cue.

NOTE: Cues are stored with the default name

'Unnamed Snapshot n' where 'n' is a count of

how many cues exist rather than its position in

the cue list.

next (current cue number +1) cue.

NOTE: Pressing and Holding ALT, then pressing NEXT will recall the cue numerically prior

to the current cue (current cue number -1)

CUE LIST is open the cue that is highlighted.

NOTE: If the CUE LIST is open you may scroll to any cue and press the SCROLL/ADJUST

encoder to instantly recall it.

NOTE: For more information on the Cue List and Snapshot Control see also CUE LIST.

Soundcraft Si Compact User Guide 0311

Table of Contents