Global Mode Encoders And Functions - SoundCraft Si Performer User Manual

GLOBAL MODE ENCODERS AND FUNCTIONS

The Global Mode encoders offer control of a key parameter across all channels or buses currently
active on the surface:
1. GLOBAL 'GAIN/TRIM' key: press to make all the encoders function as the input GAIN (or
TRIM for line & digital sources) for all the channels on the currently active fader layer. When
operating as line trims the centre red LED will light when the trim gain is 0dB.
NOTE: This key has no function in BUS or MATRIX modes.
2. GLOBAL 'FILT' key: press to make all the encoders function as the input HPF for all the channels
on the currently active input fader layer.
NOTE: This key has no function in MATRIX mode.
3. GLOBAL 'PAN' key: press to make all the encoders function as the PAN for all the channels or
buses on the channels on the currently active fader layer. The centre red LED will light when
the pan is at the mid-point.
NOTE: This key has no function in MATRIX mode.
NOTE: When mixing to a stereo bus using the tOTEM follow keys the global encoders will switch
to PAN mode and shall act as the PAN or BALANCE control from the channels to the bus.
Soundcraft Si Performer User Guide V1.1 1112
1 2 3
23