The Keypad - Rosslare HLX-40 User Manual

4.3 The Keypad

The keypad is used to program the wireless panel and to arm
and disarm the sensors.
The following table describes the keypad functions:
Key
Menu
Enter
Local
Emergency
AWAY
HOME
HomeLogiX HLX-40 User Guide
Figure 5: The Keypad
Press to
Navigate between User and Installer menus,
and Normal mode.
Navigate to the next menu or the next option
within a menu.
Accept an entry or selection when in the
menu.
Displays the panel current status when in
standby.
When pressed for 3 seconds, a standard
panic alarm Sounds
Arm all sensors and detectors. Use this
function when there is no one in the
home/office. You must enter a user or master
code.
Arm all perimeter sensors and detectors as
defined by the Installer. Use this function when
the home/office is occupied. You must enter
a user or master code.
System Overview
Page 17