Rosslare HLX-40 User Manual page 18

System Overview
Key
DISARM
QUICK
0
Normal
mode only
1
Normal
mode only
2
Normal
mode only
3
Normal
mode only
Page 18
Press to
Disarm all armed sensors and detectors. You
must enter a user or master code.
If the duress code is enabled by the Installer,
entering the duress code when disarming
sends a duress event to the Central Station
and Private Phone.
The system is locked out for 90 seconds in the
event of 5 failed attempts to disarm the
system.
Ignore an entry (escape) or to move one
level up in a menu.
Memory Display
Press once to display the alarms caused
during the last arming period per zone. The
first line of the displays shows the alarm
memory and the second line shows the zone
description, event and time.
Press Enter to toggle view between zone
description and the Time & Date.
Press Menu to display the next event.
Press Esc to exit.
You can also use 0 to insert a space when
typing an entry.
Note: When EN-CENELEC standard is enabled,
only the Master user can access the memory
display.
PGM ON – If enabled by Installer.
Press once to enter PGM activation mode.
The PGM status is indicated on the right. Press
1 to activate PGM 1 and/or 2 to activate
PGM 2.
PGM OFF – if enabled by Installer.
Press once to enter PGM deactivation mode.
The PGM status is indicated on the right. Press
1 to deactivate PGM 1 and/or 2 to
deactivate PGM 2.
Chime ON/OFF
Manually toggle the chime on and off (if
enabled by the installer) The default is off.
HomeLogiX HLX-40 User Guide