Enabling Zone Bypass; Defining Bypass Zones; Enrolling A Remote Control - Rosslare HLX-40 User Manual

9.7.1.

Enabling Zone Bypass

For the zone bypass option to work, the feature must first be
enabled.
To enable zone bypass:
1. Using the Menu button, select Zone Bypass and press Enter.
2. Using the Menu and Enter buttons, access the Set
Activation submenu.
3. Using the Menu button, choose to either Activate or
Deactivate the zone bypass feature.
4. Press Enter to save.
9.7.2.

Defining Bypass Zones

You can define each of the 40 zones to be bypassed when
arming the system.
The zone bypass is deactivated once the system is disarmed
following the bypassed arming.
To define bypass zones:
1. Using the Menu button, select Zone Bypass and press Enter.
2. Press Enter to access the Select Zone submenu.
3. Using the numeric keypad or the Menu button, select the
specific zone to define and press Enter to confirm your
selection.
4. Using the Menu button, choose to either Bypass or Un-
Bypass the selected zone.
5. Press Enter to save your selection.
6. Arm the system using one of the arming options.
7. To arm the system again using the same bypass settings,
press 6 followed by one of the arming buttons.

9.8 Enrolling a Remote Control

You can enroll up to eight remote controls, and specify
functions for each button on the remote control. You can also
delete enrolled remote controls.
HomeLogiX HLX-40 User Guide
User Menu Options
Page 31