Operating The Hlx-40; Quick Reference; About Everyday Operation; Arming Options - Rosslare HomeLogiX HLX-40 User Manual

Operating the HLX-40

3. Operating the HLX-40
This chapter describes the day to day operation of the system, as well as
provides a quick reference for the Arming/Disarming buttons in the system.
3.1

Quick Reference

Use the following buttons on the keypad for quick arming the system:
AWAY
HOME
DISARM
QUICK
For more on the keys and their function, see Section 4.3.
3.2

About Everyday Operation

The HLX-40 system allows you to ensure the security of your home, both while
you are home and while you are away. The system allows you to control
attached subsystems and appliances such as garage doors, lights, heating, and
air conditioner via an expandable PGM output.
3.3

Arming Options

The following subsections describe the arming options available to the installer.
3.3.1

Arm Away

ARM AWAY is the full arming of the system, best used when there is no one is
at home or in the office. In Away mode, the system enters Alarm mode if there
is a zone violation, regardless of perimeter or interior type.
If the installer enabled the "Unvacated Premises" option, the system may
trigger Arm Home (Stay) mode automatically if the system was armed in Arm
Away mode, but there was no exiting from the delay zone during the exit
delay period.
To arm the sy stem using AWAY:
1. Verify that the system is ready for arming.
2. Press the AWAY arming key.
3. Enter your user code.
12

Table 1: Quick Reference to Keypad Buttons

Arms all sensors and detectors for use when there is no
one at home/office.
Arms all perimeter sensors and detectors as defined by
the installer. For use when home/office is occupied.
Disarms all armed sensors and detectors.
Ignore an entry or move one level up in a menu ESC
arms the system.
HomeLogiX™ HLX-40 User Guide