Rosslare HLX-40 User Manual page 16

System Overview
two seconds. There are several display options as described
below:
System Status
Ready
Indicates that the system is ready for arming.
Indicates that the system is not ready and that there are
active zones.
Press Enter to see which zones are active. If there is more
than one active zone, pressing Enter or Menu displays
Not ready
the next open zone.
When there are no more active zones, the display
returns to the idle view. You can also exit the active zone
view by pressing the ESC, Away or Home buttons.
Event Display
Indicates that a problem exists on the system. The
following System Troubles may appear in the TRBL
message:
• Battery Missing
• Dead Battery
• Low battery
• Power failure (AC Fail)
• RF jamming
TRBL
• Line Fail
• Communication Fail
• Tamper
In addition the following Zone Troubles may appear in
the TRBL message:
• Tamper
• Low battery
• Short Wire
• Supervision (failure)
MEM
Indicates an alarm in memory
MSG
Indicates that a personal message is waiting
Page 16 HomeLogiX HLX-40 User Guide