Sound Indicators - Rosslare HLX-40 User Manual

Homelogix advanced wireless security panel
Hide thumbs Also See for HLX-40:
Table of Contents

Advertisement

Key
4
Normal
mode only
5
Normal
mode only
6
Normal
mode only
7
Normal
mode only
8
Normal
mode only
9
Normal
mode only

4.4 Sound Indicators

The following sounds are emitted by the system and keypad:
Sound
Single beep
Long Beep
Three short beeps
Four short beeps a
minute
HomeLogiX HLX-40 User Guide
Press to
Volume
Manually Adjust the system's volume level.
Sound ON/OFF – If enabled by Installer.
Manually toggle voice messages, keypad
tone, and other sounds on and off (except for
trouble beeps, forced arming, enrollment and
RF test of wireless devices which is always on).
Bypass – If enabled by installer.
Enter the last User menu Bypass option to arm
the system by bypassing active zones. You
must enter a user or master code.
Record User Message
Record a voice message of up to fifteen
seconds. Press and hold the 7 key for three
seconds to erase a message.
Event Log Display
Press once and your Master user code to
display the event log. The first line of the
display shows the event log (for example
Burglar Alarm). The second line shows the
zone description or system.
Press Enter to toggle view between zone
description and the Time & Date.
Press Menu to display the next event.
Press Esc to exit.
Play User Message
Listen to voice messages.
Sounded When
A key is pressed
Illegal key entry
An entry is successfully accepted.
If enabled, on trouble condition.
System Overview
Page 19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HLX-40 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Hlx-40bHlx-40a

Table of Contents