Christie CP2220 User Manual page 168

Appendix B: Serial API
SUBCODE DESCRIPTION OF USE
NONE
0 - restart DLP communications;
1 - stop DLP communications.
EXAMPLES:
(STP 0) Restart DLP communication
(STP 1) Stop DLP communication
(STP?) Request current state. Example response is (STP!000)
cinema projector Platform and Motherboard Related Information (SYS)
Query only command that returns version information.
SUBCODE DESCRIPTION OF USE
BACB
Return backplane version information.
FACB
Return faceplate version information.
PIBB
Return PIB version information.
EXAMPLES:
(SYS+BACB?) Returns backplane version information.
Target Color Gamut (TCG)
Set the Target Color Gamut file. This file describes desired output colorimetry from the cinema projector. For this
control to function the Measured Color Gamut Data must be accurate.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select target color gamut for the current channel.
EXAMPLES:
(TCG+C108 "Atlantis") Use file "Atlantis" on channel 108
(TCG+C108? ) Get target color file name on channel 108
(TCG?L) List all available entries of target color control
Enable 3D (TDC)
Enable/disable 3D on the specified channel or the current channel. This controls the frame rate multiplication fea-
tures that allow for simulated three dimensional image projection.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select 3D enable for the current channel
EXAMPLES:
(TDC+C108 1) Enable 3D on channel 108
(TDC+C108?) Get 3D setting on channel 108
(TDC?) Get current 3D status
B-26 CP2220 User Manual
020-100420-08 Rev.1 (5-2014)