Christie CP2220 User Manual page 156

Appendix B: Serial API
Lamp Changed (LPC)
Record current lamp information into the lamp history, then start a new entry. Set lamp information of a new lamp
type ID, serial number, and pre-used hours. When the values are set, use the (LPC 1) command to add the record.
SUBCODE DESCRIPTION OF USE
LPID
Set lamp type ID for the new lamp
NONE
Save lamp information to lamp history
PREV
Set lamp previous lamp hours for the new lamp
SERL
Set lamp serial number for the new lamp
EXAMPLES:
(LPC+LPID 2) Set lamp type ID
(LPC+SERL "CDX30-001") Set lamp serial number
(LPC 1) Save information to lamp history. Consecutive lamp changes require a 5 - 10 second time difference as writing to
EEPROM is involved.
Lamp File (LPF)
Set or get the current lamp file for the current or a specific channel. This command can also be used to save the
active lamp data to a new or existing lamp file, and delete a lamp file from the system.
SUBCODE DESCRIPTION OF USE
Cxxx
Set or get the current lamp file for a specific channel
NONE
Set lamp file for current channel
SAVE
Save the currently active lamp data to a file. Will overwrite an existing file with the same name.
FDEL
Delete a lamp file from the system.
EXAMPLES:
(LPF+C101 "Default") Set lamp file for channel 1 to file "Default"
(LPF?L) List all available lamp files
(LPF 1) Set lamp file for current channel to index 1 in file list
(LPF+SAVE "filename") If the file doesn't exist, it will be created. If the file already exits, it will be overwritten.
(ILF+FDEL "LampSetup1") Delete the "LampSetup1" lamp file from the system.
(ILF+FDEL 3) Delete the lamp file at index 3 in the list.
Lamp Hours (LPH)
Get information on installed lamp. Read only control.
SUBCODE DESCRIPTION OF USE
FLSK
Return total failed lamp strikes on the installed lamp
FRSK
Return total failed lamp restrikes on the installed lamp
LPOF
Return total lamp unexpected off times on the installed lamp
B-14 CP2220 User Manual
020-100420-08 Rev.1 (5-2014)