Answering Machine Connection; Manual/Auto Reception Switching - Canon MultiPASS C530 Service Manual

7.2 Answering Machine Connection

This connection is for effective use of an answering machine connected to the extension phone jack. If the
other party is a telephone, the answering telephone records the message, and if the other party is a fax, the
fax receives automatically.
7.2.1 Settings
(1) Connect the answering machine to the extension telephone jack, and set the answering machine to
"Answer".
(2) Press the fax's Receive Mode button and select the Ans. Machine mode.
7.2.2 Parameters
Item
CNG Signal detection time

7.3 Manual/Auto Reception Switching

Determines if the fax switches to document receive mode, after the fax rings for a specified time when the
fax is in the manual receive mode.
7.3.1 Settings
(1) Set the "MAN/AUTO SWITCH" in the user data "RX SETTINGS" to "ON".
(2) Set the number of seconds that the fax will wait after detecting ringing signal from the telephone line
before going into reception, using user data "F/T RING TIME" in "MAN/AUTO SWITCH".
7.3.2 Parameters
Item
MAN/AUTO SWITCH
F/T RING TIME
MultiPASS C530/C560 Chapter 2: Technical Reference
Default Setting
Setting Switch
60 sec. Service data #3 25
Default Setting
Setting Switch
OFF User data
15 sec. User data
2-35
Selection
Range
0 to 999 sec.
Selection
Range
ON/OFF
1 to 99 sec.