Canon MultiPASS C530 Service Manual page 89

MultiPASS C530/C560 Chapter 2: Technical Reference
NOTE
Paper feed error detection
There are three types of paper feed error which may occur:
a) No paper error
Occurs when the Paper Edge Sensor does not detect the paper's leading edge the start
of the paper picked up operation is executed, it is executed again. If the paper is still
not sensed , it is assessed as a No paper error.
b) Eject delay jam
Occurs when the Paper Edge Sensor does not detect the paper's trailing edge after the
page has been printed, or after 22 inches (558.8 mm) of paper eject operation has
been performed.
c) Paper size error
When the size of the paper being fed is different from that registered in the user data,
and the page being printed is divided during printing, a paper size error will occur.
When a paper feed error occurs, memory reception begins from the page at which the
paper feed error occurred.
When copying, the data are erased from memory as soon as an error occurs.
2-10